久久久国产一区二区_欧美在线小视频_高清一区二区三区_久久综合久久久_成人久久久久久久久_亚洲精品视

FMA-2602A-VOL_FMA-2614A-A_FMA-2623A-VOL流量控制器OMEGA

PPS或銅質結構

液體的測量精度為1%

重復性高達0.2%

0 ~ 5V模擬輸出

可選帶顯示屏或不帶顯示屏型號

FMA-2602A-VOL_FMA-2614A-A_FMA-2623A-VOL流量控制器OMEGA

規格:

精度： 滿量程的±1%（液體）和±3%（氣體）

顯示屏： 3? 位數字LCD顯示屏，22 mm (?")高

輸出信號： 0 ~ 5 Vdc，可調范圍為±20%（常規）

電源要求： 11.5 ~ 15 Vdc穩壓電源，30 mA（常規）

標配傳感器材質： 40%玻璃纖維填充的聚苯硫醚、玻璃視窗、不銹鋼軸承座；藍寶石軸和軸承；氟橡膠O形圈（標配）

額定壓力： 20°C (68°F)時為40 psi（氣體）；100 psi（液體）；500 psi（進行液體測量的銅質流量計）

額定溫度： 0 ~ 50°C (32 ~ 122°F)

溫度靈敏度： ±0.2%/°C

線性度： 滿量程的±3%

重復性： 對于氣體，在額定最大流量的50% ~100%范圍內，為滿量程的±0.5%；

對于液體，則為滿量程的±0.2%

電纜組件： 長度為0.9 m (3')的電纜

外形尺寸： 

帶顯示屏： 76 x 44 x 89 mm  (3 x 1.75 x 3.5")

不帶顯示屏： 60 x 42 x 37 mm  (2.35 x 1.65 x 1.25")

壓力靈敏度： ±0.07%/mm Hg（使用1 ~ 3個大氣壓的空氣）

安裝方式： 安裝孔為#4螺釘的孔z

FMA-2602A-VOL_FMA-2614A-A_FMA-2623A-VOL流量控制

LR1000 series flow sensors can measure the flow rate from 20 mL/min to 5 L/min. These sensors are suitable for various industrial, commercial and laboratory flow applications. FLR1000 series flow sensors use 12 Vdc power supply, which can be integrated into a data acquisition system that provides 12.5 Vdc power supply for sensors and receives 0-5 Vdc linear signals from sensors. Because of cost-effectiveness, FLR1000 series flowmeters can replace traditional glass tubes or spherical flowmeters in applications requiring electrical signals proportional to flow rate.

FLR1000 series uses impact turbine to determine gas flow rate. Turbine speed is linear in large dynamic range. The photoelectric system consists of a secondary tube that emits infrared light. Light energy is alternately reflected and absorbed by "spokes" deposited on small turbines. A photodiode detects the reflected light energy. Therefore, when the turbine rotates under the action of gas velocity, the circuit will generate electric pulse. Signal processing circuit can provide DC voltage output proportional to current speed. For example, when the rated flow rate is 20%, the output signal is 1.0 Vdc; when the rated flow rate is 50%, it is 2.5 Vdc; when the rated flow rate is 80%, it is 4.0 Vdc; when the rated flow rate is reached, it is 5.0 Vdc. The sensor can handle a flow rate higher than 20% of the rated flow rate without damage.

器OMEGA